ThinkSystem SR650/a V4 Internal Raid/HBA Adapter Cable Kit
See this document for information about the ThinkSystem SR650/a V4 Internal Raid/HBA Adapter Cable Kit.
The option kit comes with the following components.

1 One SlimSAS x8 to MCIO x8 cable, 450 mm
2 One MTK x8 to SlimSAS x8 cable, 900 mm
3 One power cable, 210 mm
4 One power Y-cable, 300/800 mm
5 One power cable, 300 mm
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR650 V4 | Install a rear PCIe adapter and riser card | Internal cable routing |
| SR650a V4 | Install a rear PCIe adapter and riser card | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925