ThinkSystem SR650 V2 12x 3.5” Expander Backplane Cable Kit
See this document for information about the ThinkSystem SR650 V2 12x 3.5” Expander Backplane Cable Kit.
This option kit comes with the following components.
1
Two front backplane power cables, 150 mm
2
One rear backplane power Y cable, 310 mm/310 mm
3
One rear backplane power Y cable, 200 mm/200 mm
4
One SAS cable, front backplane to Gen 3 RAID adapter, 930 mm
5
One SAS Y cable, front backplane to Gen 4 RAID adapter, 930 mm/930 mm
6
Two NVMe Y cables, front backplane to system board, 150 mm/150 mm
7
One SAS cable, rear backplane to Gen 3 RAID adapter, 340 mm
8
One SAS Y cable, front/rear backplane to Gen 4 RAID adapter, 930 mm/400 mm
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (November 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925