ThinkSystem Single CPU SR650 V2 Internal RAID Adapter Cable Kit
See this document for information about the ThinkSystem Single CPU SR650 V2 Internal RAID Adapter Cable Kit. This cable kit provides cables for the custom form factor (CFF) internal RAID adapter used in the server with one processor installed.
This option kit comes with the following components.
1
Three front backplane power cables, 170 mm
2
Two power cables for CFF RAID adapter and CFF expander, 210 mm
3
One PCIe cable, CFF RAID adapter to system board, 345 mm
4
Two SAS/SATA Y cables, CFF RAID adapter to front backplane, 140 mm/140 mm
5
One SAS/SATA Y cable, CFF RAID adapter to CFF expander, 150 mm/150 mm
6
One SAS/SATA cable, CFF expander to front backplane, 200 mm
7
Two SAS/SATA cables, CFF expander to front backplane, 110 mm
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (November 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925