ThinkSystem SR650a V4 E3.S 1T Long Cable Kit

See this document for information about the ThinkSystem SR650a V4 E3.S 1T Long Cable Kit.

The option kit comes with the following components.

1 Two MTK x8 to GENZ 1C*2 cables, 850/850 mm

2 One power cable, 900 mm

3 One power cable, 1200 mm

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:

  • "Install an E3.S drive cage and backplane" in SR650a V4 User Guide
  • "Internal cable routing" in SR650a V4 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925