ThinkSystem SR650 V3 2.5" Chassis Front BP2 Gen5 NVMe Cable Kit
See this document for information about the ThinkSystem SR650 V3 2.5" Chassis Front BP2 Gen5 NVMe Cable Kit.
This option kit comes with the following components.
1
Two MCIO x8 to MCIO x8 cables, 320 mm
2
Two MCIO x8 to MCIO x8 cables, 200 mm
3
One MCIO x8 to MCIO x8 cable, 200 mm
4
One Swift x8 to MCIO x8 cable, 300 mm
5
One Swift x8 to MCIO x8 cable, 350 mm
6
One Swift x8*2 to MCIO x8*2 cable, 320 mm/360 mm
7
One Swift x8*2 to MCIO x8*2 cable, 220 mm/260 mm
8
One Swift x8 to MCIO x8 cable, 210 mm
9
One Swift x8 to MCIO x8 cable, 260 mm
10
One Swift x8 to MCIO x8 cable, 400 mm
11
One Swift x8 to MCIO x8 cable, 260 mm
12
Two MCIO x8 to MCIO x8 cables, 800 mm
13
One Power cable, 170 mm
NOTE
- The illustration in this document might differ slightly from your hardware.
- The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (May 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925