ThinkSystem SR650 V3 2.5" Chassis Rear Backplane Gen5 NVMe Cable Kit

See this document for information about the ThinkSystem SR650 V3 2.5" Chassis Rear Backplane Gen5 NVMe Cable Kit.

This option kit comes with the following components.

1 Two MCIO x8 to MCIO x8 cables, 250 mm

2 Two MCIO x8 to MCIO x8 cables, 320 mm

3 One power cable, 370 mm

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:

  • "Install the 4 x 2.5" drive backplane and drive cage" in SR650 V3 User Guide

  • "Install the 8 x 2.5" drive backplane and drive cage" in SR650 V3 User Guide

  • "Internal cable routing" in SR650 V3 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (July 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925