ThinkSystem SR655 1611-8P Cable Kit

See this document for information about the ThinkSystem SR655 1611-8P Cable Kit.

This option kit comes with the following components.

1 One NVME cable (280 mm)

2 One NVME cable (280 mm)

3 One NVME cable (660 mm)

4 One power cable (300 mm)

5 One power cable (150 mm)

NOTE

• The illustration in this document might differ slightly from your hardware.

• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:

  • "Hardware replacement procedures" at SR655 User Guide

  • "Internal cable routing" at SR655 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925