Skip to main content

ThinkSystem SR655 V3 2.5" Chassis Middle Backplane NVMe Cable Kit

See this document for information about the ThinkSystem SR655 V3 2.5" Chassis Middle Backplane NVMe Cable Kit .

This option kit comes with the following components.

ThinkSystem SR655 V3 2.5-inch Chassis Middle Backplane NVMe Cable Kit

1 One MCIO x8*2 to MCIO x8*2 cable, 680/680 mm​

2 One MCIO x8*2 to MCIO x8*2 cable, 590/640 mm​

3 One MCIO x8 to MCIO x8*2 cable, 690/740 mm​

4 One SlimSAS x8*2 to MCIO x8*2 cable, 580/630 mm​

5 One power cable, 270 mm​

6 Two MCIO x8*2 to SlimSAS x8*2 cables, 180 mm​

7 Two MCIO x8*2 to SlimSAS x8*2 cables, 290 mm​

8 One power cable, 200/300 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (April 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925