Skip to main content

ThinkSystem SR665 V3 2.5" Chassis Front BP3 NVMe Cable Option Kit

See this document for information about the ThinkSystem SR665 V3 2.5" Chassis Front BP3 NVMe Cable Option Kit.

This option kit comes with the following components.

ThinkSystem SR665 V3 2.5-inch Chassis Front BP3 NVMe Cable Option Kit

1 One power cable, 170 mm​

2 One MCIO x4*2 to SlimSAS x8 cable, 650 mm​

3 One MCIO x8 to SlimSAS x8 cable, 650 mm​

4 One SlimSAS x8 to SlimSAS x8 cable, 680 mm​

5 Two Swift x8 to SlimSAS x8 cables, 290 mm​

6 Two MCIO x8 to SlimSAS x8 cables, 880 mm​

7 Two SlimSAS x8 to SlimSAS x8 cables, 740 mm​

8 Two Swift x8 to SlimSAS x8 cables, 410 mm​

9 Two Swift x8 to SlimSAS x8 cables, 350 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (December 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925