ThinkSystem SR950 V3 Rear Management NIC Adapter Kit

See this document for information about the ThinkSystem SR950 V3 Rear Management NIC Adapter Kit.

This option kit comes with the following components.

1 One PCIe bracket

2 One rear Ethernet card

3 Two screws

4 One interposer board to rear Ethernet port assembly cable

4 One system I/O board to interposer board cable

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install the Ethernet port assembly" in SR950 V3 User Guide
  • "Internal cable routing" in SR950 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (September 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925