Skip to main content

ThinkSystem SR645 V3 M.2 Enablement Cable Option Kit

See this document for information about the ThinkSystem SR645 V3 M.2 Enablement Cable Option Kit.

This option kit comes with the following components.

ThinkSystem SR645 V3 M.2 Enablement Cable Option Kit

1 One MCIO x4 *2 to SlimSAS x8 cable, 650 mm​

2 One SlimSAS x8 to HD x4 cable, 680 mm​

3 One SlimSAS x8 to SlimSAS x8 cable, 780 mm​

4 One power cable, 320 mm​

5 One signal and power cable, 630 mm​

6 One signal and power cable, 730 mm​

7 One MCIO x8 to MCIO x8 cable, 580 mm​

8 One MCIO x8 to MCIO x8 cable, 740 mm​

9 One MCIO x8 to MCIO x8 cable, 650 mm​

10 One MCIO x8 to MCIO x8 cable, 740 mm​

11 One ULP to SlimSAS x4 cable, 630 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (June 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925