Skip to main content

ThinkSystem SD550 V3 RAID kit for 2 CPU configurations (w/o RAID card)

See this document for information about the ThinkSystem SD550 V3 RAID kit for 2 CPU configurations (w/o RAID card).

This option kit comes with the following components.

ThinkSystem SD550 V3 RAID kit for 2 CPU configurations (w/o RAID card)

1 One internal adapter bracket​

2 One RAID power cable (Micro-Fit 3.0 power 2x5 to Micro-Fit 3.0 power 2x5, 150 mm)​

3 One RAID signal cable (Low-profile SlimSAS x8 to SlimLine x8, 140 mm)​

4 Two RAID SAS/SATA cables (SlimSAS x4 to SlimSAS x4, 590 mm / 520 mm)​

NOTE

  • The illustration in this document might differ slightly from your hardware.

  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (March 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925