Skip to main content

ThinkSystem SR645 V3 M.2 RAID Enablement Cable Option Kit

See this document for information about the ThinkSystem SR645 V3 M.2 RAID Enablement Cable Option Kit.

This option kit comes with the following components.

ThinkSystem SR645 V3 M.2 RAID Enablement Cable Option Kit

1 One MCIOx4*2 to SlimSASx8 cable, 650 mm​

2 One SlimSASx8 to 5350-8i HDx8 cable, 680 mm​

3 One SlimSASx8 to 540-8i SlimSASx8 cable, 780 mm​

4 One power cable, 320 mm​

5 One M.2 to SlimSASx4 cable, 630 mm​

6 One M.2 to MCIOx4 cable, 730 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (June 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925