ThinkSystem SR645 10 x 2.5" AnyBay Backplane SAS/SATA Cable Kit
The option package contains the following items.
1
On-board SATA cable, from PCIe4 (MB) to SAS1 (BP)
2
On-board SATA cable, from PCIe5 (MB) to SAS2 (BP)
3
On-board SATA cable, from PCIe5 (MB) to SAS2 (BP) and Rear (BP)
4
SFF G4 cable, from C1 (SFF) to SAS 2 (BP)
5
SFF G4 cable, from C0 (SFF) to SAS0 (BP) and SAS1 (BP)
6
SFF G4 cable, from C1 (SFF) to SAS2 (BP) and Rear BP
7
Power cable, from BP Pwr to Power (BP)
8
SFF G3 cable, from C0/C2 (SFF) to SAS/SAS2 (BP)
9
SFF G3 cable, from C0 and C1 (SFF) to SAS0 (BP) and SAS1 (BP)
MB: motherboard
SFF: RAID adapter installed in rear PCIe riser slots
Note
Some cables may not be used in certain configurations.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
Second Edition (October 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925