Skip to main content

ThinkSystem SR665 2.5" Chassis Front BP3 NVMe cable kit

The option package contains the following items.

ThinkSystem SR665 2.5" Chassis Front BP3 NVMe cable kit

1 Power cable from MB to front 2.5" BP, from PWR 1/2/3 (MB) to Pwr (BP)​

2 On-board to front 8 x 2.5" AnyBay Bay2#1, from PCIe8/PCIe3 (MB) to NVMe6–7 (BP3) NVMe2–3 (BP1)​

3 On-board to front 8 x 2.5" AnyBay Bay2#2, from PCIe1 (MB) and PCIe2 (MB) to NVMe0–1 (BP3)​

4 On-board to front 8 x 2.5" AnyBay Bay2#3, from PCIe3 (MB) to NVMe2–3 (BP3)​

5 On-board to front 8 x 2.5" AnyBay Bay2#4, from PCIe7 (MB) to NVMe4–5 (BP3)​

MB: motherboard

For information about installing the option product, refer to the Internal cable routing chapter in the Setup Guide, or go to: https://thinksystem.lenovofiles.com/help/topic/7D2W/internal_cable_routing.html

To get the latest technical information and download device drivers and updates, go to: https://datacentersupport.lenovo.com/us/en/products/servers/thinksystem/sr665/7d2w/downloads/driver-list

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (October 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925