ThinkSystem ST250 Series ODD/Tape Cable kit
See this document for information about the ThinkSystem ST250 Series ODD/Tape Cable kit.
The option kits come with the following components.
1 ODD/tape drive power cable (200 mm + 100 mm)
2 ODD/tape drive signal cable (600 mm + 50 mm)
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| ST250 V2 | Install an optical drive Install a tape drive | Internal cable routing |
| ST250 V3 | Install an optical drive Install a tape drive | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (October 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925