Skip to main content

ThinkSystem ST250 Series RAID Cable Kit

See this document for information about the ThinkSystem ST250 Series RAID Cable Kit.

The option kits come with the following components.

ThinkSystem ST250 Series RAID Cable Kit

1 One HBA MSHD cable for lower backplane/BP1 (450 mm)​

2 One HBA MSHD cable for lower backplane/BP1 (400 mm)​

3 One Slimline to MSHDx2 cable for upper backplane/BP2 (300 mm + 500 mm)​

4 Two HBA MSHD cables for upper backplane/BP2 (500 mm)​

5 One Slimline to MSHDx2 cable for lower backplane/BP1 (300 mm + 450 mm)​

6 One Slimline to MSHD cable for lower backplane/BP1 (300 mm)​

7 RAID flash power module extension cable (190 mm)​

8 RAID flash power module holder for RAID 940-8i​

9 RAID flash power module holder for RAID 9350-16i and 9350-8i​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelInternal cable routing
ST250 V2Internal cable routing
ST250 V3Internal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (October 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925