ThinkSystem SR250 Series/SR150 Front VGA Connector Kit
See this document for information about the ThinkSystem SR250 Series/SR150 Front VGA Connector Kit.
This option kit comes with the following component.
1 One VGA connector and cable
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR250 V2 | Install the VGA cable (2.5-inch drive model) Install the VGA cable (3.5-inch drive model) | Internal cable routing |
| SR250 V3 | Install the VGA cable (2.5-inch drive model) Install the VGA cable (3.5-inch drive model) | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (February 2024)
© Copyright Lenovo 2024.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925