ThinkSystem SR950 X40 RAID Cable Kit

See this document for information about the ThinkSystem SR950 X40 RAID Cable Kit.

This option kit comes with the following components.

1 One SR950 short SAS cable to controller

2 One SR950 middle SAS cable to controller

3 One SR950 long SAS cable to controller

4 One SR950 SAS Y-cable to controller

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a hard disk drive backplane (upper tray)" in SR630 V3 Maintenance Manual
  • "Install a hard disk drive backplane (lower tray)" in SR630 V3 Maintenance Manual
  • "Internal cable routing" in SR950 Maintenance Manual
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (July 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925