Skip to main content

SR250/ST250 Series Intrusion Cable kit

See this document for information about the SR250/ST250 Series Intrusion Cable kit.

This option kit comes with the following component.

SR250/ST250 Series Intrusion Cable kit

1 One intrusion cable

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installationInternal cable routing
SR250 V3Install the intrusion switchInternal cable routing
ST250Install the intrusion switchN/A
ST250 V2Install the intrusion switchInternal cable routing
ST250 V3Install the intrusion switchInternal cable routing
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925