Zum Hauptinhalt springen

ThinkSystem SR645 10 x 2.5" AnyBay Backplane SAS/SATA Cable Kit

Das Zusatzeinrichtungspaket enthält die folgenden Komponenten.

ThinkSystem SR645 10 x 2.5" AnyBay Backplane SAS/SATA cable kit

1 On-Board SATA-Kabel, von PCIe4 (MB) zu SAS1 (BP)​

2 On-Board SATA-Kabel, von PCIe5 (MB) zu SAS2 (BP)​

3 On-Board SATA-Kabel, von PCIe5 (MB) zur Rückseite (BP) und SAS2 (BP)​

4 SFF G4-Kabel, von C1 (SFF) zu SAS 2 (BP)​

5 SFF G4 Kabel, von C0 (SFF) zu SAS0 (BP) und SAS1 (BP)​

6 SFF G4-Kabel, von C1 (SFF) zu SAS2 (BP) und Rückseite (BP)​

7 Netzkabel, von BP PWR zu Power (BP)​

8 SFF G3-Kabel, von C0/C2 (SFF) zu SAS/SAS2 (BP)​

9 SFF G3-Kabel, von C0 und C1 (SFF) zu SAS0 (BP) und SAS1 (BP)​

MB: Motherboard

SFF: RAID-Adapter, in den hinteren PCIe-Adaptersteckplätzen installiert

Anmerkung

Einige Kabel dürfen in bestimmten Konfigurationen nicht verwendet werden.

Installation von Zusatzeinrichtungen

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (October 2022)

© Copyright Lenovo 2022.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925