ThinkEdge SE100 Fan Kit

See this document for information about the ThinkEdge SE100 Fan Kit.

This option kit comes with the following components.

1 Two fan modules

2 Six M2 screws

3 One fan 1 cable bracket

4 One fan 2 cable bracket

5 Four M3 screws

6 Two fan bridge cables, 75mm

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to:
  • "Install a fan module" in SE100 User Guide
  • "Internal cable routing" in SE100 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2025)

© Copyright Lenovo 2025.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925