Flex System network adapters
A variety of network adapters are available for use with the Flex System compute nodes and network switches.
You can install Ethernet or Fibre Channel network adapters in the compute nodes. If you need to verify that an adapter is compatible with the compute node, go to the Lenovo ServerProven website.
Important: The network adapters in the compute nodes also must be compatible with the network switches in the chassis.
📄️ Flex System FC5022 2-port 16Gb FC Adapter
The FC5022 Fibre Channel adapter provides Lenovo X Architecture compute nodes with high-speed access to a Fibre Channel storage area network (SAN). This 2-port 16 Gb adapter is based on the Brocade 16 Gb Fibre Channel ASIC, and it uses industry-proven technology to provide high-speed, reliable access to SAN connected storage. The two ports enable redundant connections to the SAN, which can increase reliability and reduce downtime.
📄️ Flex System CN4022 2-port 10Gb Converged Adapter
The CN4022 10 Gb Converged Adapter is designed for use in Lenovo X Architecture compute nodes.
📄️ Flex System CN4052 2-port 10Gb Virtual Fabric Adapter
The CN4052 10 Gb Virtual Fabric adapter is a converged network adapter (CNA) that is designed for use in Lenovo X Architecture compute nodes.
📄️ Flex System CN4054 and CN4054R 10Gb Virtual Fabric Adapters
The CN4054 and CN4054R 10 Gb Virtual Fabric adapters are converged network adapters (CNA) that are designed for use in Lenovo X Architecture compute nodes.
📄️ Flex System CN4058 8-Port 10Gb Converged Network Adapter
The CN4058 8-Port 10Gb Converged Network Adapter (CNA) is designed for use in IBM Power Systems compute nodes.
📄️ Flex System CN4058S 8-port 10 Gb Virtual Fabric Adapter
The CN4058S 10 Gb Virtual Fabric adapter is a converged network adapter (CNA) that is designed for use in Lenovo X Architecture compute nodes.
📄️ Flex System EN4172 2-port 10Gb Ethernet Adapter
The EN4172 2-port 10Gb Ethernet Adapter is designed for use in Lenovo X Architecture compute nodes.
📄️ Flex System FC5024D 4-port 16Gb FC Adapter
The FC5024D 4-port 16 Gb Fibre Channel adapter is designed for use in Lenovo Flex System x222 compute nodes. This adapter is based on the Brocade 16 Gb Fibre Channel ASICs, and it uses industry-proven technology to provide the compute node with high-speed, reliable access to a Fibre Channel storage area network (SAN). The four ports enable redundant connections to the SAN, which can increase reliability and reduce downtime.
📄️ Flex System FC5052 2-port 16Gb FC Adapter
The FC5052 2-port 16 Gb Fibre Channel adapter provides Lenovo X Architecture compute nodes with high-speed access to a Fibre Channel storage area network (SAN). This adapter is based on the Emulex 16 Gb Fibre Channel ASIC, and it uses industry-proven technology to provide high-speed, reliable access to SAN connected storage. The two ports enable redundant connections to the SAN, which can increase reliability and reduce downtime.
📄️ Flex System FC5054 4-port 16Gb FC Adapter
The FC5054 4-port 16 Gb Fibre Channel adapter provides Lenovo X -Architecture compute nodes with high-speed access to a Fibre Channel storage area network (SAN). This adapter is based on the Emulex 16 Gb Fibre Channel ASICs, and it uses industry-proven technology to provide high-speed, reliable access to SAN connected storage. The four ports enable redundant connections to the SAN, which can increase reliability and reduce downtime.
📄️ Flex System FC5172 2-port 16Gb FC Adapter
The FC5172 2-port 16 Gb Fibre Channel adapter provides Lenovo X Architecture compute nodes with high-speed access to a Fibre Channel storage area network (SAN). This adapter is based on the QLogic 16 Gb Fibre Channel ASIC, and it uses industry-proven technology to provide high-speed, reliable access to SAN connected storage. The two ports enable redundant connections to the SAN, which can increase reliability and reduce downtime.
📄️ Flex System IB6132D 2-port FDR InfiniBand Adapter
The IB6132D 2-port FDR InfiniBand adapter is designed for use in Lenovo Flex System x222 compute nodes. This 2-port adapter is based on the Mellanox ConnectX-3 technology, and it can support two compute nodes simultaneously, with both nodes operating at InfiniBand FDR speeds (56 Gbps or 14 Gbps per lane).
📄️ Flex System EN4132 2-port 10Gb Ethernet Adapter
The EN4132 Ethernet adapter is designed for use in Lenovo X Architecture compute nodes.
📄️ Flex System EN4132 2-port 10Gb RoCE Adapter
The EN4132 2-port 10 Gb Remote Direct Memory Management (RDMA) over Converged Ethernet (RoCE) adapter is based on Mellanox ConnectX-2 EN technology and is designed for use in IBM Power Systems compute nodes.
📄️ Flex System IB6132 2-port FDR InfiniBand Adapter
The IB6132 2-port FDR InfiniBand adapter is designed for use in Lenovo X Architecture compute nodes.
📄️ Flex System EN2024 4-port 1Gb Ethernet Adapter
The EN2024 4-port 1 Gb Ethernet adapter provides a Lenovo X Architecture or IBM Power Systems compute node with 1 Gb Local Area Network (LAN) connection to 1 Gb Ethernet scalable switches.
📄️ Flex System FC3172 2-port 8Gb FC Adapter
The FC3172 Fibre Channel adapter provides Lenovo X Architecture and IBM Power Systems compute nodes with high-speed access to a Fibre Channel storage area network (SAN). This 2-port 8 Gb adapter is based on the Qlogic 8 Gb Fibre Channel ASIC, and it uses industry-proven technology to provide high-speed, reliable access to SAN connected storage. The two ports enable redundant connections to the SAN, which can increase reliability and reduce downtime.
📄️ Flex System FC3052 2-port 8Gb FC Adapter
The FC3052 Fibre Channel adapter provides Lenovo X Architecture compute nodes with high-speed access to a Fibre Channel storage area network (SAN). This 2-port 8 Gb adapter is based on the Emulex 8 Gb Fibre Channel ASIC, and it uses industry-proven technology to provide high-speed, reliable access to SAN connected storage. The two ports enable redundant connections to the SAN, which can increase reliability and reduce downtime.
📄️ Flex System EN4054 4-port 10Gb Ethernet Adapter
The EN4054 4-port 10 Gb Ethernet adapter is designed for use in IBM Power Systems compute nodes.
📄️ Flex System IB6132 2-port QDR InfiniBand Adapter
The IB6132 2-port QDR InfiniBand adapter is designed for use in IBM Power Systems compute nodes.