ThinkSystem NVIDIA ConnectX-7 NDR OSFP400 1-port PCIe Gen5 x16 InfiniBand Adapter DWC

See this document for information about the ThinkSystem NVIDIA ConnectX-7 NDR OSFP400 1-port PCIe Gen5 x16 InfiniBand Adapter DWC.

This option kit comes with the following components.

1 ConnectX-7 NDR 400 PCIe adapter

2 Three M3x17.5 screws

3 Two Phillips #2 screws

4 Interface plate

5 Putty pad (between interface plate and PCIe riser assembly)

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option for SD650 V3, refer to:
  • Install a PCIe riser assembly (ConnectX-7 NDR 400)
  • Internal cable routing
• To install the option for SD650-I V3, refer to:
  • Install a PCIe riser assembly (ConnectX-7 NDR 400)
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925