Skip to main content

ThinkSystem V3 Management NIC Adapter Kit

See this document for information about the ThinkSystem V3 Management NIC Adapter Kit.

This option kit comes with the following components.

ThinkSystem V3 Management NIC Adapter Kit

1 ThinkSystem 2nd BMC port management Adapter​

2 Rear OCP NIC management label​

3 One NIC management cable (160 mm)​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

  • To install the option, refer to "Hardware replacement procedures" and "Internal cable routing" in the server User Guide, which is available at Lenovo Docs.

  • For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (March 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925