ThinkEdge SE100 without Expansion Kit VESA Mount
See this document for information about the ThinkEdge SE100 without Expansion Kit VESA Mount.
This option kit comes with the following component.
1 One ThinkEdge SE100 node sleeve assembly without expansion kit
2 One 140W power adapter cage
3 One power adapter bracket
4 Two M4 screws
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to: "Install a node to the wall or the ceiling" or "Install a node to the DIN rail" in SE100 User Guide
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2025)
© Copyright Lenovo 2025.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925