ThinkEdge DIN Mount Kit (Extreme Shock & Vibe)
See this document for information about the ThinkEdge DIN Mount Kit (Extreme Shock & Vibe).
This option kit comes with the following components.
1 Rail kit x2
2 M4 screw x4
3 Screw x2
4 Screw driver
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation |
|---|---|
| SE350 | Configuration Installation Guide |
| SE350 V2 | Install a node to the DIN rail |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (March 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925