ThinkSystem SR630 V4 x16 Gen5 Riser 2 LP Option Kit
See this document for information about the ThinkSystem SR630 V4 x16 Gen5 Riser 2 LP Option Kit.
This option kit comes with the following components.
1 One x16 low-profile riser card and 1U low-profile riser cage assembly
2 PCIe slot and OCP slot label
- One 1U PCIe 1-3 and OCP 1 label
- One 1U PCIe 1 & 3 and OCP 1 label
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to "Install a rear riser card" in SR630 V4 User Guide.
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925