ThinkSystem SD530 V3 Riser Kit for 1 CPU configurations
See this document for information about the ThinkSystem SD530 V3 Riser Kit for 1 CPU configurations.
This option kit comes with the following components.
1 One 1U PCIe riser cage and 1U1S cabled riser card (MCIO x16 + MCIO x16, 340 mm / 660 mm)
2 One riser power cable (power 2x8 to power 2x4, 310 mm)
3 One PCIe filler (vented)
4 One screw
NOTE
- The illustration in this document might differ slightly from your hardware.
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925