ThinkSystem SD550 V3 Riser Kit for 1 CPU configurations
See this document for information about the ThinkSystem SD550 V3 Riser Kit for 1 CPU configurations.
This option kit comes with the following components.
1 One 2U PCIe riser cage and 2U1S cabled riser card (MCIO x16*2, 270 mm / 780 mm)
2 One riser power cable (power 2x8 to power 2x4, 290 mm)
3 Two PCIe fillers (vented) and two screws
NOTE
-
The illustration in this document might differ slightly from your hardware.
-
The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.
Option installation
- To install the option, refer to:
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (March 2024)
© Copyright Lenovo 2024.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925