ThinkSystem SD550 V3 Riser Kit for 2 CPU configurations

See this document for information about the ThinkSystem SD550 V3 Riser Kit for 2 CPU configurations.

This option kit comes with the following components.

1 One 2U PCIe riser cage and 2U2S cabled riser card (MCIO x16*2, 260mm / 360 mm)

2 One riser power cable (power 2x8 to power 2x4, 290 mm)

3 Two PCIe fillers (vented) and two screws

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:
  • "Install a PCIe riser assembly" in SD550 V3 User Guide
  • "PCIe riser cable routing" in SD550 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (March 2024)

© Copyright Lenovo 2024.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925