ThinkSystem SD650, SD650-I V3 1U PCIe Riser

See this document for information about the ThinkSystem SD650, SD650-I V3 1U PCIe Riser.

This option kit comes with the following component.

1 Riser cage

NOTE

The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option for SD650 V3, refer to:
  • Install a PCIe riser assembly (ConnectX-6)
  • Install a PCIe riser assembly (ConnectX-7 NDR 200)
  • Install a PCIe riser assembly (ConnectX-7 NDR 400)
  • Internal cable routing
• To install the option for SD650-I V3, refer to:
  • Install a PCIe riser assembly (ConnectX-6)
  • Install a PCIe riser assembly (ConnectX-7 NDR 200)
  • Install a PCIe riser assembly (ConnectX-7 NDR 400)
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925