ThinkSystem SD665 V3 1U PCIe Riser
See this document for information about the ThinkSystem SD665 V3 1U PCIe Riser.
This option kit comes with the following component.
1 Riser kit. Used only in slot 2 in the right node or the left node.
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to "Install a PCIe riser assembly (ConnectX-6)" in SD665 V3 User Guide, "Install a PCIe riser assembly (ConnectX-7 NDR 200)" in SD665 V3 User Guide, or "Install a PCIe riser assembly (ConnectX-7 NDR 400)" in SD665 V3 User Guide.
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (November 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925