Skip to main content

ThinkEdge SE360 V2 Riser Assembly (M.2 Riser + M.2 Riser)

See this document for information about the ThinkEdge SE360 V2 Riser Assembly (M.2 Riser + M.2 Riser).

This option kit comes with the following components.

ThinkEdge SE360 V2 Riser Assembly (M.2 Riser + M.2 Riser)

1 One riser assembly with M.2 adapter, M.2 riser card and M.2 cabled adapter​

2 Three M3 screws​

3 One M.2 cabled adapter signal cable, 150 mm​

4 One M.2 cabled adapter power cable, 170/200 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925