ThinkSystem SR635 V3 PCIe G5 Riser1 LP Option Kit

See this document for information about the ThinkSystem SR635 V3 PCIe G5 Riser1 LP Option Kit.

This option kit comes with the following components.

1 One x16 PCIe Gen 5 Riser 1

2 One low-profile riser cage

3 One full-height riser cage

4 Four screws

NOTE

• Riser 1 card can only be installed into the low-profile riser cage.
• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to:
  • "Install a riser card" in SR635 V3 User Guide
  • "Internal cable routing" in SR635 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (April 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925