ThinkSystem SR650a V4 x8 Gen5 Front High Power Cable Riser Option Kit

See this document for information about the ThinkSystem SR650a V4 x8 Gen5 Front High Power Cable Riser Option Kit.

The option kit comes with the following components.

1 One cable riser card (cable length 550/470 mm)

2 Two M3.5 screws

NOTE

• The illustration in this document might differ slightly from your hardware.
• The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

• To install the option, refer to:

  • "Install a front PCIe riser card" in SR650a V4 User Guide
  • "Internal cable routing" in SR650a V4 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925