Skip to main content

ThinkSystem SR650 V3 PCIe Gen5 Riser 3/4 Option Kit

See this document for information about the ThinkSystem SR650 V3 PCIe Gen5 Riser 3/4 Option Kit.

This option kit comes with the following components.

ThinkSystem SR650 V3 PCIe Gen5 Riser 3/4 Option Kit

1 2U Rear PCIe 4LP riser3/4 cage with riser card 3​

2 Rear riser card 4​

3 Three M3 screws​

4 Two M3.5 screws​

5 One label​

6 Two MCIO x8 to Swift x8 cables, 600 mm​

7 Two MCIO x8 to Swift x8 cables, 980 mm​

8 Two MCIO x8 to Swift x8 cables, 180 mm​

9 One riser3 Power Y cable, 160 mm​

10 One riser3 sideband cable, 160 mm​

NOTE

  • The illustration in this document might differ slightly from your hardware.

  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925