Skip to main content

ThinkSystem SR655 V3 x8/x8 G4 Riser3 LP Option Kit

See this document for information about the ThinkSystem SR655 V3 x8/x8 G4 Riser3 LP Option Kit.

This option kit comes with the following components.

ThinkSystem SR655 V3 x8/x8 G4 Riser3 LP Option Kit

1 Rear 4LP riser 3/4 assembly​

  • One riser cage tray with two 4LP riser 3/4 cages
  • One riser card on riser 3
  • Two M3.5 screws

2 One riser card​

3 Three M3 screws​

4 Two M3.5 screws​

5 One installation label​

6 One MCIO x8*2 to Swift x8*2 cable, 450/450 mm​

7 One MCIO x8*2 to Swift x8*2 cable, 490/490 mm​

8 One sideband signal cable, 160 mm​

9 One power cable, 160 mm​

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

Second Edition (June 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925