Skip to main content

ThinkSystem SR860 V3 3 x16 & 1 x8 + 7mm PCIe G5 Riser 3 FHFL Option Kit

See this document for information about the ThinkSystem SR860 V3 3 x16 & 1 x8 + 7mm PCIe G5 Riser 3 FHFL Option Kit.

This option kit comes with the following components.

ThinkSystem SR860 V3 3 x16 & 1 x8 + 7mm PCIe G5 Riser 3 FHFL Option Kit

1 One 3 x16 and 1 x8 FHHL Gen5 riser with 7mm drive cage

2 One FH riser extender

3 One power cable (100 mm)

4 Three riser signal cables (440 mm)

5 Two riser signal cables (500 mm, flat 140 mm)

6 One riser signal cable (600 mm, flat 140 mm)

7 One riser signal cable (540 mm, flat 140 mm)

8 One 7mm drive power cable (340 mm)

9 One 7mm drive signal cable (320 mm)

NOTE
  • The illustration in this document might differ slightly from your hardware.
  • Cable Breakline The break lines indicate that part of the cable is hidden in the illustration. Refer to the information in this document for the actual cable length.

Option installation

Option installation
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925