ThinkSystem V3 1U x16 PCIe G4 Riser 1 with Rear drive
See this document for information about the ThinkSystem V3 1U x16 PCIe G4 Riser 1 with Rear drive .
This option kit comes with the following components.
1 ThinkSystem x16 PCIe Gen4 riser card
2 ThinkSystem 1U MS riser cage (low-profile)
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to "Hardware replacement procedures" in the server User Guide, which is available at Lenovo Docs.
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (December 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925