ThinkSystem V3 2U x16 PCIe Gen4 Riser 1/2 Option Kit

See this document for information about the ThinkSystem V3 2U x16 PCIe Gen4 Riser 1/2 Option Kit.

This option kit comes with the following components.

1 Gen4 x16 riser 1/2 assembly

• One 1FH riser cage
• One Gen4 x16 PICe riser card
• Two M3.5 screws

2 Two PCIe slot sequence labels

• One PCIe label (1-3)
• One PCIe label (4-6)

NOTE

The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to the applicable user guide:
  • "Rear PCIe adapter and riser assembly replacement" in SR650 V3 User Guide
  • "Rear PCIe adapter and riser assembly replacement" in SR655 V3 User Guide
  • "Rear PCIe adapter and riser assembly replacement" in SR665 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (February 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925