ThinkSystem V3 1U x16 PCIe G5 Riser1 with Full Height Slot3
See this document for information about the ThinkSystem V3 1U x16 PCIe G5 Riser1 with Full Height Slot3.
This option kit comes with the following components.
1 One x16/E PCIe G5 riser 1
2 One 1U LP riser cage with filler
3 One 1U FH riser cage
4 Four screws
NOTE
- The illustration in this document might differ slightly from your hardware.
- Install the riser 1 card to the LP riser cage. And install a riser 2 card to the FH riser cage. To get a G5 riser 2 card, go to "ThinkSystem V3 1U x16 PCIe G5 Riser 2 Option Kit".
- An additional order for the riser 2 card will be needed.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation |
|---|---|
| SR630 V3 | Install a rear riser card |
| SR645 V3 | Install the rear riser card |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (February 2023)
© Copyright Lenovo 2023.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925