Skip to main content

ThinkEdge Node Sleeve

See this document for information about the ThinkEdge Node Sleeve.

This option kit comes with the following components.

ThinkEdge Node Sleeve

1 Node sleeve

2 Rubber x4

3 Tapping screw x4

4 Wall anchor x4

NOTE
  • The illustration in this document might differ slightly from your hardware.

Option installation

  • To install the option, refer to the applicable user guide:
Server modelHardware installation
SE350Configuration Installation Guide and Install a node
SE350 V2Configuration guide
Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (March 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925