ThinkSystem V3 2U EIA Latch with VGA Port
See this document for information about the ThinkSystem V3 2U EIA Latch with VGA Port.
This option kit comes with the following components.
1
One left rack latch with VGA port
2
One cable retainer
3
Four M3.5 screws
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
Server model | Hardware installation | Internal cable routing |
---|---|---|
SR650 V3 | Install the rack latches | Internal cable routing |
SR655 V3 | Install the rack latches | Internal cable routing |
SR665 V3 | Install the rack latches | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
Option installation | |
---|---|
To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. |
First Edition (December 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925