ThinkSystem V3 2U EIA Latch with VGA & External Diagnostics Ports
See this document for information about the ThinkSystem V3 2U EIA Latch with VGA & External Diagnostics Ports.
This option kit comes with the following components.
1 One left rack latch with VGA and external diagnostics ports
2 One cable retainer
3 Four M3.5 screws
NOTE
The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Hardware installation | Internal cable routing |
|---|---|---|
| SR650 V3 | Install the rack latches | Internal cable routing |
| SR655 V3 | Install the rack latches | Internal cable routing |
| SR665 V3 | Install the rack latches | Internal cable routing |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” and “Internal cable routing” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (December 2022)
© Copyright Lenovo 2022.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925