ThinkEdge SE100 Expansion Kit for Active Cooling GPU

See this document for information about the ThinkEdge SE100 Expansion Kit for Active Cooling GPU .

This option kit comes with the following components.

1 One x8 PCIe Gen4 riser card

2 One expansion kit bottom cover (for GPU adapter)

3 One expansion kit top cover

4 Sixteen M2 screws

5 Three M3 screws (long)

6 One M3 screw (short)

7 One support baffle

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to: "Replace components in the PCIe Expansion kit" in SE100 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2025)

© Copyright Lenovo 2025.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925