ThinkEdge SE100 Expansion Kit for NIC Adapter
See this document for information about the ThinkEdge SE100 Expansion Kit for NIC Adapter.
This option kit comes with the following components.
1 One x8 PCIe Gen4 riser card
2 One expansion kit bottom cover (for Ethernet adapter)
3 One expansion kit top cover
4 One fan holder
5 Two fan modules
6 One M3 screw (short)
7 Three M3 screws (long)
8 Six M2.5 screws (round head)
9 Fifteen M2.5 screws (flat head)
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to: "Replace components in the PCIe Expansion kit" in SE100 User Guide
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2025)
© Copyright Lenovo 2025.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925