ThinkEdge SE350 V2 Anti-Tampering Keylock Kit

See this document for information about the ThinkEdge SE350 V2 Anti-Tampering Keylock Kit.

This option kit comes with the following components.

1 One Kensington Lock without cable

2 One keylock switch bracket

3 One keylock switch with cable

4 One M3 screw

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to:

  • "Install a keylock switch with cable" in SE350 V2 User Guide

• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (July 2023)

© Copyright Lenovo 2023.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925