ThinkEdge SE350 V2/SE360 V2 Port Dust Cover Kit
See this document for information about the ThinkEdge SE350 V2/SE360 V2 Port Dust Cover Kit.
This option kit comes with the following components.
1 Eight RJ-45 fillers
2 Two USB Type-A fillers
3 Four SFP28 fillers
4 Two USB Type-C fillers
5 One Bluetooth antenna filler for SE360 V2
6 One power connector filler for SE350 V2
7 One safety screw for SE350 V2
NOTE
- The illustration in this document might differ slightly from your hardware.
Option installation
- To install the option, refer to the applicable user guide:
| Server model | Server components | Hardware installation |
|---|---|---|
| SE350 V2 | Front view Rear view | Install the top cover |
| SE360 V2 | Front view Rear view |
- For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.
| Option installation | |
|---|---|
| To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com. | |
| For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com. | |
First Edition (May 2021)
© Copyright Lenovo 2021.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925