ThinkEdge SE455 V3 Full Length Adapter Enablement Kit

See this document for information about the ThinkEdge SE455 V3 Full Length Adapter Enablement Kit.

This option kit comes with the following components.

1 One riser 1 filler

2 One middle filler

3 One riser 2 filler

4 One extender for PCIe riser 1

5 One extender for PCIe riser 2

6 Two low-profile fillers

7 Ten M3 screws

NOTE

• The illustration in this document might differ slightly from your hardware.

Option installation

• To install the option, refer to:
  • "Install a PCIe adapter" in SE455 V3 User Guide
  • "Change the processor air baffle combination for 1U heat sink" in SE455 V3 User Guide
  • "Install the processor air baffle" in SE455 V3 User Guide
• For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support.

Option installation
To install the option, refer to “Hardware replacement procedures” in the server User Guide, which is available at Lenovo Docs https://pubs.lenovo.com.
For the latest technical information including firmware and driver downloads, go to Lenovo Data Center Support website https://datacentersupport.lenovo.com.

First Edition (May 2021)

© Copyright Lenovo 2021.

LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration (GSA) contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925